MODEL ACS10 (M+P)
System Type Self-powered ultra Compact Line Source Speaker System
Maximum SPL 136dB Peak (Calculated)
Frequency Response 95~22,000Hz
Nominal Directivity 100° (H), Ver cal is array depenent
Rigging 0° / 5° / ° angles, maximum of 6 cabinets flown per line (with 10 mes safety)
Acoustic Configuration 2-way coaxial with patented IsoTop™ waveguide
Transducers 10” LF with 3” PI grade VC + 1” exit / 1.7” VC Annular HF (All Neodymium)
Amplifier Module CELTO SPM3000 with aluminium heatsink
Power Supply CELTO Pulsar with Ac ve PFC + SMPS (universal mains 90~260V AC)
Amplifier Type 4th generation CELTO TrueSound proprietary class D
Power Output LF: 3000W Peak / 1500W RMS (total for Master + Passive cabinets)
HF: 1600W Peak / 800W RMS (total for Master + Passive cabinets)
Preamplifier  -120dB noise floor op-amps, MUSE™ Fine Gold capacitors
DSP Architecture 115dB 32-bit AKM AD/DA converters, 56-bit accumulators
DSP Control Crossover, EQ, Phase and Limiter
DSP Presets Near / Mid / far field – Flat/ Music
Connectivity ACS10M: Balanced XLR In/Thru, SpeakOn Out (powers one ACS10P), PowerCon In/Out
Cooling ACS10M with Smart thermal management on internal variable speed long life fan
Enclosure Exterior grade Birch Plywood with tongue and groove assembly
Finish Touring grade Rubberized PolyUrea coating
Associated Sub ACS218
Size (WxHxD) 450x280x395mm
Weight ACS10M: 16kg / ACS10P: 13kg
Shipping Configuration One ACS10P + one ACS10P in a single carton of 695x500x580mm and 37.5kg
MODEL ACS218
System Type Self-powered subwoofer
Maximum SPL 139dB Peak (Calculated)
Frequency Response 30~95Hz
Nominal Directivity Omnidirectional
Rigging No
Acoustic Configuration Dual 18” (2×18”) woofer
Transducers CELTO 18SW1201-4 with PI grade In/Out voice coil and KevlarTM loaded paper cone
Amplifier Module CELTO SPM3000S with aluminium heatsink
Power Supply CELTO Pulsar with Active PFC + SMPS (universal mains 90~260V AC)
Amplifier Type 4th generation CELTO TrueSound proprietary class D
Power Output 6000W Peak / 3000W RMS
Preamplifier  -120dB noise floor op-amps, MUSETM Fine Gold capacitors
DSP Architecture 115dB 32-bit AKM AD/DA converters, 56-bit accumulators
DSP Control Crossover, EQ, Phase and Limiter
DSP Presets Flat / Punch / Deep
Connectivity Balanced XLR In/Thru, PowerCon In/Out
Cooling Smart thermal management on variable speed long life fan
Enclosure Heavy Braced Exterior grade Birch Plywood with tongue and groove assembly
Finish Touring grade Rubberized PolyUrea coating
Associated Sub ACS10(M+P)
Size (WxHxD) 1100x580x740mm net / 1220x680x850mm carton
Weight 83kg net / 92kg gross

Downloads

CELTO_ACS_EDS_A0

Reviews

There are no reviews yet.

Be the first to review “ACS”

Your email address will not be published. Required fields are marked